Report overview
Wind turbine blade is mounted on the wind turbine. Most wind turbines have three blades, though there are some with two blades. Blades are generally 30 to 50 meters (100 to 165 feet) long, with the most common sizes around 40 meters (130 feet). Longer blades are being designed and tested. Blade weights vary, depending on the design and materials?a 40 meter LM Glasfiber blade for a 1.5 MW turbine weighs 5,780 kg (6.4 tons) and one for a 2.0 MW turbine weighs 6,290 kg (6.9 tons).
The wind power generation industry has grown rapidly and expanded worldwide in recent years to meet high global demand for clean electricity. In addition, from 2008 to 2014, the cumulative global power generating capacity of wind turbine installations in GWs increased by more than three times. Wind energy is now used in over 80 countries, 24 of which have more than 1 GW installed. The rapid growth in the wind power generation industry has been driven by population growth and the associated increase in electricity demand, widespread emphasis on expanded use of renewable energy and water resource management, the increasing effectiveness and cost- competitiveness of wind energy and accelerated urbanization in developing countries, among other factors.
Market Analysis and Insights: Global Composite Wind Power Blades Market
Due to the COVID-19 pandemic, the global Composite Wind Power Blades market size is estimated to be worth US$ million in 2023 and is forecast to a readjusted size of US$ million by 2030 with a CAGR of % during the forecast period 2023-2030. Fully considering the economic change by this health crisis, Below 1.5 MW accounting for % of the Composite Wind Power Blades global market in 2022, is projected to value US$ million by 2030, growing at a revised % CAGR from 2023 to 2030. While Offshore segment is altered to an % CAGR throughout this forecast period.
North America Composite Wind Power Blades market is estimated at US$ million in 2022, while Europe is forecast to reach US$ million by 2030. The proportion of the North America is % in 2022, while Europe percentage is %, and it is predicted that Europe share will reach % in 2030, trailing a CAGR of % through the analysis period 2023-2030. As for the Asia, the notable markets are Japan and South Korea, CAGR is % and % respectively for the next 6-year period.
The global major manufacturers of Composite Wind Power Blades include LM Wind Power, Vestas, Enercon, Tecsis, Gamesa, Suzlon, TPI Composites, Siemens and CARBON ROTEC, etc. In terms of revenue, the global 3 largest players have a % market share of Composite Wind Power Blades in 2022.
Global Composite Wind Power Blades Market: Drivers and Restrains
The research report has incorporated the analysis of different factors that augment the market?s growth. It constitutes trends, restraints, and drivers that transform the market in either a positive or negative manner. This section also provides the scope of different segments and applications that can potentially influence the market in the future. The detailed information is based on current trends and historic milestones. This section also provides an analysis of the volume of production about the global market and about each type from 2018 to 2030. This section mentions the volume of production by region from 2018 to 2030. Pricing analysis is included in the report according to each type from the year 2018 to 2030, manufacturer from 2018 to 2023, region from 2018 to 2023, and global price from 2018 to 2030.
A thorough evaluation of the restrains included in the report portrays the contrast to drivers and gives room for strategic planning. Factors that overshadow the market growth are pivotal as they can be understood to devise different bends for getting hold of the lucrative opportunities that are present in the ever-growing market. Additionally, insights into market expert?s opinions have been taken to understand the market better.
Global Composite Wind Power Blades Market: Segment Analysis
The research report includes specific segments by region (country), by manufacturers, by Type and by Application. Each type provides information about the production during the forecast period of 2018 to 2030. by Application segment also provides consumption during the forecast period of 2018 to 2030. Understanding the segments helps in identifying the importance of different factors that aid the market growth.
Segment by Type
Below 1.5 MW
1.5 MW
1.5-2.0 MW
2.0 MW
2.0-3.0 MW
3.0 MW
3.0-5.0 MW
Above 5.0 MW
Segment by Application
Offshore
Onshore
By Company
LM Wind Power
Vestas
Enercon
Tecsis
Gamesa
Suzlon
TPI Composites
Siemens
CARBON ROTEC
Acciona
Inox Wind
Zhongfu Lianzhong
Avic
Sinoma
TMT
New United
United Power
Mingyang
XEMC New Energy
DEC
Haizhuang Windpower
Wanyuan
CSR
SANY
Production by Region
North America
Europe
China
Japan
Consumption by Region
North America
U.S.
Canada
Europe
Germany
France
U.K.
Italy
Russia
Asia-Pacific
China
Japan
South Korea
India
Australia
Taiwan
Indonesia
Thailand
Malaysia
Philippines
Vietnam
Latin America
Mexico
Brazil
Argentina
